Skip to content

Steps to Clear Paper Jam on HP Officejet Pro 9019 Premier

  • by
Hp Officejet Pro 9019

Hp Officejet Pro 9019 printers come in a variety of designs and types. They create black-and-white or colour documents and photographs for use at home and in the business. A jam can occur when a paper piece becomes caught in an Officejet Pro printer. Will either produce crumpled spread material or halt, necessitating the removal of the stuck paper. To clear a paper jam in an HP Officejet Pro printer, open the device and remove the blockage.

Step 1:

One of the most typical spots for a paper jam is in the paper tray. To empty the paper tray of any excess paper. If any paper becomes stuck while still being fed from the tray into the printer, remove it from the printer.

If this is the only spot where the material has been stuck, restart the printer.

Step 2:

Remove the back access door from the HP Officejet Pro 9019 printer. This will enable you to examine the printer to see if any paper is jammed. There should be a button or a latch that will allow you to remove the door.

Remove any material that has been stuck in the rollers at the back of the printer. Check to be sure that all of the paper has been eliminated, including any fragments or ripped pieces.

Replace the access door to the printer. If no paper is stuck in the printer, press the Resume button.

Step 3:

Remove the front lid of the HP Officejet Pro 9019 printer. Get rid of any leftover paper clogs. Remove any paper cautiously to prevent the risk of damaging the printer.

Step 4: 

Inspect the print carriage to confirm that it is in excellent working order. It should be able to travel from one side to the other of the printer.

Unplug the power supply and gently shake the carriage from side to side. If it becomes caught or hung up on something, do not try to force it.

If the printer carriage is not moving freely, rotate the rollers three times with your fingers inside the printer. To avoid getting something trapped in the printer, roll them up.

Step 5:

Test the printer to ensure that it is printing correctly and does not jam again. Normal HP Officejet Pro 9019 paper should be used to refill the paper tray. Continue to hold down the Resume button until a proper identification prints.

Please contact us if you continue to have paper jams. In addition, we will be able to give you with handheld assistance in removing the jammed paper from the HP Officejet Pro 9019 first generation printer.

Fix 1: Examine the front cover for stuck paper

Checking the device’s front cover is the quickest and easiest HP paper jam remedy. If you come across any chunks of blocked paper, be cautious when removing them.

Fix 2: Inspect the input tray for blocked paper

Checking the input tray is the first Hp deskjet paper jam remedy. In 8 stages, learn how to inspect the input tray and take the paper from this region.

Connect the printer to the computer and push the “Power” button.

Remove the power cord from the printer’s back while it is turned on.

Find the input tray.

Pull the paper out of the input tray gently.

Examine the input tray for any scraps of paper or other things that may have fallen inside.

Reposition the printer to its original position.

Reconnect the printer’s power cable and turn it on.

Use your HP printer as usual from now on.

Fix 3: Inspect the output tray for blocked paper

In this article, we’ll show you how to remove a paper jam from an HP printer by entering the output tray. This repair may be completed in just four simple steps.

Turn off the printer and unplug it from the power supply.

Find the output tray.

To remove any jammed paper from the output tray, gently pull it out.

Now try printing. Your gadget will function properly.

Fix 4: Clean the paper feed rollers

As you may be aware, paper feed rollers are a popular location for paper to become caught. In 5 simple steps, here’s how to clear a paper jam in an HP printer by clearing the rollers.

Switch off the printer and unplug it from the power supply.

Raise and open the input tray.

Locate the grey paper pick roller and thoroughly wipe them with a moist cloth to eliminate any dust or dirt accumulation.

Before reinstalling the rollers, make sure they are thoroughly dry.

Reconnect the printer’s power cable and turn it on.

Fix 5: Clean the Printer Rollers

Washing the printer rollers might also assist you in resolving the HP paper jam problem. We’ve included a 6-step technique for cleaning them properly below.

Take out all of the papers from the input tray.

Select “Settings” using the “Down arrow” and then “Ok.”

Select “Tools” with the “Down arrow,” then “Ok.”

Select “Clean paper feed” and then click “Ok.”

Before proceeding, wait until the printer completes the cleaning procedure.

Now try printing.

How to Resolve the ‘Stalled Carriage’ Error on an HP All-In-One Printer

Here’s another well-known HP printer issue that most of us have undoubtedly seen before. If you haven’t already, you will soon (I’m not jinxing you). Because the more frequently or infrequently you print, the more probable it is that you may encounter a jammed or stopped cartridge. Although there are other typical causes for this. In this essay, I listed the causes and the best internet treatments for this iconic printer problem. These changes were performed to an HP Photosmart 5520 e-all-in-one printer but may also be applied to other HP printers with an LED control panel.

Here are several fast and easy remedies you may try:

Fix 1: 

  • Turn off the printer and wait 60 seconds for it to cool down.
  • Turn on the printer and wait for it to warm up. (Wait until the printer stops producing noise.) Open the paper tray and insert paper into it. Check to see whether the paper feeds.
  • Reposition the paper and put the input tray back.
  • Print a test page.
  • If the printer prints, the problem is solved. You may continue printing without interruption.
  • If the printer does not print, move to step 2.

Fix 2:

You are about to unclog a paper jam. Of course, I have a different article for this, but I’ll just post it here so you don’t have to look elsewhere.

  • Start the printer.
  • Remove any loose paper by sliding open the input tray.
  • If a piece of paper becomes stuck in the printer, carefully take it out.
  • Check the tray thoroughly for any remaining ripped paper. Look for any additional alien items.
  • Insert the input tray. Go to the printer’s rear.
  • Remove the power cable from the printer while it is still turned on. Remove any cords that are attached, as well as the USB.
  • Examine the printer lid for any foreign items or damaged paper.
  • To avoid inner damage, remove them gently. Using a flashlight, thoroughly inspect the printer for any scraps or little bits of paper.
  • Locate the drain door handle (the white handle at the printer’s rear).
  • Remove the cleanout door. Look for any foreign items or stuck paper. Make careful to properly inspect the printer.
  • Lift the term was initially lever to examine whether anything is caught between.
  • Check for any paper jams or strange items by turning the printer on its side.
  • Connect the printer’s power cord and other cords.
  • Turn on the printer and wait for it to warm up.
  • Print a test page.
  • If the printer writes, the problem is solved. If it does not print, proceed to the next fix.

Fix 3: 

  • Turn on the printer.
  • Unplug the printer’s power cable while it is still turned on. Remove the power source’s plug.
  • Remove any cords that are attached as well.
  • Remove the printer top to see the cartridge carriage.
  • The carriage should be on the printer’s right side. Manually move the carriage to the right. Whether the carriage does not move, check to see if there is anything blocking the movement.
  • Remove any foreign items or paper jams.
  • Move the canister carriage to the left manually. Check for and remove any obstructions in the same manner. Restore the carriage to its original position on the right side.
  • Close the printer lid when there is no longer any blockage.
  • Reattach the cord and any other cords. Connect the printer to an electrical outlet.
  • Turn on the printer and let it warm up.
  • Print a test page.
  • If the printer is still not printing at this point, proceed to the next step.

Fix 4:

  • Start the printer. Remove the printer cover.
  • Waiting for the cartridge carriage in the printer’s centre to move.
  • Remove the HP Photosmart 5520 ink cartridges and set them on paper carefully to prevent leakage.
  • If the nozzles are clogged, clean them.
  • If your cartridges are running short on ink, you may need to replace them.
  • Install ink cartridges correctly and in the relevant container.
  • Close the printer cover once all of the cartridges are safely placed.
  • Print a test page.
  • If the issue persists, contact a printer technician. If your printer is still under warranty, contact HP support and take advantage of any assistance they may provide.