Skip to content

How to Fix Brother Printer Error TS-05

  • by
Brother Printer Error TS-05

Brother printers are intelligent printers that assist you in determining issues rather than becoming stuck and causing problems for you. They display the issue in a coded language, and each Brother Printer Error TS-05 may be fixed by using certain troubleshooting procedures.

No, you do not always need to contact an IT professional. You may correct the mistakes on your own. This page has been developed specifically to provide you with troubleshooting options for the fault ‘Brother Printer error ts-05.’

Brother Printer has acquired a reputation for inventing and producing advanced printers loaded with cutting-edge technical features that promote user-friendliness. Remote printing is a noteworthy feature featured in several of their most recent printers. If you’ve been using a Brother printer and the TS-05 issue has been appearing for a few days, it may be resolved firsthand. If you’re wondering “how to solve brother printer error TS-05,” try the solutions listed below. Before you give up and call a service, you may at least attempt the DIY techniques and address the problem as soon as possible.

What is the cause of the TS-05 Error?

  • The main cause of Error TS-05 is an improper SSID name.
  • Incorrect network keys might also be a severe cause of the printer error.
  • If the router is utilising several WEP keys when performing WEP encryptions, the printer may not get the initial WEP key.

Follow the instructions below to resolve the TS-05 issue on your Brother printer

Because of the design of the WLAN access point, wireless communication between the printers and the PC is frequently disrupted. Using several SSIDs is a legitimate benefit, but it also poses a significant risk to the Brother Printer’s network connectivity. The printer only utilises WEP Key 1 to connect to the network. If you discover that this is the root cause of the TS-05 problem, follow the procedures below to remedy it.

Step 1: Confirm the SSID and Network Key

  • To begin, ensure that the SSID and safety information are right. Re-confirm the security information, which includes the network key and the SSID, to resolve the problem.
  • Examine the WLAN router/access point’s side thoroughly.
  • There you’ll see the network name, which might be the name of the manufacturer or model.
  • Check the SSID and the authentication key.

Step 2: Verify your printer’s setup using the initial WEP key

  • On the initial lap, you must determine whether or not the printer supports WEP.
  • Check to see if your WLAN router uses WEP encryption with multiple WEP keys (such as WEP Key 1, WEP Key 2, WEP Key 3, WEP Key 4 and so on)
  • Enter WEP Key 1 now.
  • Ascertain that the Brother Printer only accepts WEP Key 1. As a result, you must configure the connectivity appropriately.
  • If the problem remains, proceed to the next step.

Step 3: Experiment with the Power-Cycle technique

  • The problem, however, is not related to the hardware because it is caused by the network. You may still use the power-cycle approach by disconnecting the power cable from the wall outlet while leaving the printer turned on, then plugging it back in and resuming the device.

If the problem persists, check your internet connection.

Brother Printer Error TS-05 Causes:

  • Error TS-05 arises due to an invalid SSID name.
  • The network key is incorrect.
  • If the router is utilising several WEP keys when performing WEP encryptions, the printer may not get the initial WEP key.

To resolve Brother Printer Error Ts-05, the following requirements must be met:

  • Examine your connection concerns. The first thing you should look at is the username. Check that the SSID you’re typing is accurate.
  • Examine the network key to ensure it is correct. Check the system name on the router to ensure it is right.
  • Check to verify if the WLAN employs WEP encryption. Then type in the WEP key1.
  • To resolve the problem code, restart the device. If you are still having the same problem, restart the devices.
  • Check the cable connections to ensure they are secure. Reconnect the cable connections and clean up the mess.

Methods for Resolving Brother Printer Error Code TS-05:

Method 1: Confirm the SSID and sensitive information again.

  • Check that the SSID and security details are accurate.
  • You must attempt to validate the SSID and security details again.
  • Determine the network name (SSID, ESSID) and key: Examine the back of your WLAN access point/router.
  • The manufacturer’s or model name might be used as the first network name.
  • Verify the SSID and security details once again (network key).

Method 2: Confirm that your additional support the first WEP protocol

  • If your wireless access point/router uses WEP encryption with multiple WEP keys (WEP Key 1, WEP Key 2, WEP Key 3, and WEP Key 4).
  • Now, input the key, and your Brother machine will only support the first WEP key.
  • Check that the mistake has been fixed; or even, go to the next step.

Method 3: Examine the WLAN Access Point/Router

  • First, make sure the WLAN uplink is turned on.

Method 4: Examine Your Internet Connection

  • Check your Internet connection to ensure that the WLAN uplink / router is operational. If you are unable to join the Internet, your WLAN access point / router may be malfunctioning.

How to Fix Brother Printer Error Code TS-05

How to Correct This Error

Follow the troubleshooting steps provided to resolve this problem. Keep following them in the following order:

Quick Repair 1

Because of the type of WLAN access point in use at the time, wireless connectivity among your PC and your Brother printer might be disrupted. The various SSID is excellent, but it conflicts with your Brother printer’s network access because your Brother printer only utilizes WEP key 1 to connect to the network. To resolve the issue, follow the instructions below:

  • Multiple SSIDs result in various SSIDs being assigned to all network-connected devices. As a result, your Brother printer and PC will have distinct SSIDs, making communication between them difficult.
  • To address the issue, adjust the wireless SSID information on your PC and Brother printer and ensure they match the SSID of your WLAN access point or router.

Quick Repair 2

Privacy Separator is another cause. Although it is a useful feature that stops many devices from accessing your network or WLAN access point, it also inhibits your Brother device from connecting to the network. So, to fix the problem, kindly do the following:

  • Navigate to the WLAN access point or Router settings.
  • To connect your Brother printer, deactivate this option in the Privacy Separator box.

Quick Repair 3

This is a solution for Mac users. You are unwittingly stopping your Brother printer from communicating to the WLAN access point or router if you choose the Mac Address filtering option. To address the problem, please follow the steps outlined below:

  • Please set your Brother printer’s Mac address.

Quick Repair 4

Other approaches to resolving the problem include:

  • Set a static IP address for your computer and the Brother printer. Check that they are the same.
  • Set your Brother printer using Wi-Fi protected Setup or AOSS.
  • Manually configure your printer using the Network Name and Network Key.

Simple Solutions for Brother Printer Error Ts 05

  • Because the Ts-05 problem in the HP printer is generally caused by connectivity issues, the first thing you should verify is the username. Check that the SSID you’re typing is accurate.
  • Also, double-check the network key to ensure it is right. Then confirm that the router’s WLAN port is connected. Check the network name on the router to ensure it is right.
  • The next item you should look at is the WEP. Check to verify if the WLAN employs WEP encryption. Then type in the WEP key1. As a result, make sure to connect using the WEP key1.
  • To resolve the problem code, restart the device. If you are still having the same problem, restart the devices. Wait a few moments after turning off the printer, computer, and router. Now, power on the devices and see if the error code has been resolved.
  • Check to see if the cable connection is still active. Replace the coaxial cables and clean up the mess.

Conclusion

We have described in full the procedures that you must do to resolve the Brother Printer Error Ts-05 in this article. If the error is unable to address the issue, seeking assistance from Brother Support professionals is the best option.

They will advise and help you solve the problem. The professionals will assist you in locating a technical solution to the issue code. Contact us right now for further information and an experienced solution.

We are examining the Brother Printer Error TS-05. This article will walk you through all of the methods to resolve the Brother Printer Error. As we all know, our Brother printer encountered several issues. You can learn more about how to solve Brother Printer Error ts-02, ts-07, 0b, 35, 50, 32, 46, 45, 30, 0a by clicking here.