Skip to content

How to Fix Brother Printer Error B200?

  • by
Brother Printer Error B200

Do you have a technical issue with your Brother printer? Are you getting Brother Printer Error B200? This error normally happens when the print cartridge becomes trapped or is broken.

If your printer cartridge stops operating, it is either spoilt or working incorrectly, which is why you are experiencing Brother Printer Error B200.

There are several technological flaws as well, which might easily annoy certain users. This is one of such bugs.

Some simple solutions. Users who are not electronics can get advanced assistance from specialists who are available for 24 hours a day, seven days a week. We have all of the tools necessary to assist you in resolving the brother printer troubleshooting problem.

Did you know you can fix Brother printers at home? The following is a comprehensive list of reliable remedies for brother printer error b200:

Cold Restart

Unplug the cable from the outlet and let it disconnected for 5 minutes. This procedure cools the printer and mitigates the impacts of residual electrical energy. Reconnect the power cord to the socket and power on the printer. If the print display indicates ‘Ready,’ the problem has been rectified. If the error code appears, go to the next step.

Firmware Upgrade

Turn off both the printer and the computer. Wait 60 seconds before turning them back on. Go to the Start menu and select ‘Control Panel.’ Locate the option ‘Hardware and Sound.’ Open it and select ‘Devices and Printers’. Right-click on the ‘Brother Printer’ icon to choose it. Choose ‘Remove Device’ and click it. Click ‘Yes’ in the little confirmation window. The printer will be removed from your computer and will no longer appear in the device list displayed in the ‘Devices and Printers’ option in the ‘Control Panel’.

Install the latest printer driver and software from the manufacturer’s website. Search for your Brother Printer’s model number under Support and Download and install the new firmware. Reboot your computer, then attempt any function on your printer to look for the problem code. If the problem remains, go to the next step.

Toner Cartridge Reset

Remove the printer’s top panel. Remove all cartridges from the cradle by lifting the cartridge cradle. Lift the lever placed beside the cartridge cradle to remove the printhead. Wait 30 seconds after clearing any collected dust with a dry towel. Examine the toner cartridges for any damage. If they are satisfactory, replace the printhead in the printer and ensure that the lever is locked. Replace all of the cartridges in the printer and close the top panel. Replace the toner cartridge with a new one if it is damaged.

Examine the Nozzle

After removing the cartridge, do a thorough nozzle test or a cleaning cycle to ensure that the cartridge is correctly placed. Use the original manufacturer’s cartridge when inserting the replacement cartridge.

If you continue to receive problem b200 on your Brother Printer, it is suggested that you contact their technical support service.

What caused the Brother Printer In Error State issue?

Though I assumed that a Brother printer in error condition was caused by a weak cable or a lack of internet connectivity, I was mistaken; those were only a few of the causes. In addition, the following were the additional causes of the Brother printer’s error status problem.

  • The printer has a paper jam.
  • A loose or faulty printer connection.
  • Incompatible printer drivers.
  • The Brother printer has been turned off or stopped.
  • Print Spooler’s pending print jobs
  • PnP monitoring in the Brother printer has been disabled.
  • Disconnected the Brother printer from the PC.
  • Ink levels are occasionally low.

Causes of Brother Printer Error Code B200

  • Purchasing a less expensive Brother printer may result in the error code b200.
  • Using foreign cartridges in Canon printers causes issues.
  • Refilling the cartridge with an unidentified product.

Simple Repairs for Brother Printer Error b200:

Solution 1: Perform a cold reset.

  • Disconnect the cable connection from the power socket and wait five to six minutes.
  • This procedure will cool down the printer.
  • Replug the cable into the power outlet’s power cord.
  • Turn on your Brother printer and restart it.

Solution 2: Update the firmware.

  • Both the bios and the PC should be updated.
  • Wait at least 60 seconds before turning off both the printer and the computer.
  • Now go to the devices and printers section.
  • Unplug the current brother printer and reinstall the brother printer’s firmware.

Solution 3: Restart the Brother Printer

  • Correct on the Brother printer and select the option to uninstall the device.
  • It is necessary to install and download the most recent version of the drivers from the main site. After installing the software, restart the printer to see whether the problem has been addressed.
  • Once everything is done, thoroughly inspect and clean the cartridge’s nozzle.
  • To resolve the issue, you must reset the toner and be extremely cautious when removing the toner cartridge.

Step 4: On a Windows 10 PC, do the preliminary troubleshooting procedures.

  • Examine the printer cords to ensure they are tight, secure, and not frayed. Worn-out cables are frequently the primary suspect in producing error state issues in Windows 10.
  • Try resetting your printer and computer, or simply shutting them down for 5 minutes and resuming them. It can occasionally perform wonderfully in dealing with the problem.
  • As I have stated, poor ink levels should not be overlooked. You should immediately check the ink or toner and, if necessary, replace them. Always use authentic Brother ink cartridges.
  • Check that no paper is stuck, and remove even the smallest piece of paper. Clear the feeder tray and complete the printer servicing.

If these methods do not address the issue, the Brother printer offline issue is most likely to blame. You will need to take a few easy steps to resolve it.

Step 5: Reconnect your offline Brother printer

Check to see whether your Brother printer has an offline status shown beneath the printer icon in the taskbar. It might have happened as a result of deactivating updated software or a faulty internet connection. Here are the procedures I did to eliminate the offline status and solve the Brother printer in error condition issue on my Windows 10 PC.

  • Navigate to the Control Center.
  • Navigate to Hardware and Sound and then choose View printers and other devices.
  • Find the Brother printer icon, okay it, and then select Set as default printer.
  • Absolutely correct on the Brother printer icon again and choose See what’s printing.
  • Click the Print tab to open a new window.
  • Simply uncheck the options to Pause Writing and Use Printer Offline.
  • Finally, remember to restart your computer.

It is possible that, in addition to the offline error, the problematic Print Spooler service causes an error state issue. In such situation, you must restart the Print Spooler services and delete any outstanding print jobs.

Step 6: To resolve the Brother printer problem, restart the Print Spooler services.

Print Spooler arranges printer tasks in the sequence in which they will be printed. It occasionally collects pending print jobs, refuses printing, and causes the Brother printer to enter an error condition. Here’s what you can do to make it right.

  • To launch the Run dialog box, press the Windows + R keys together.
  • When you type CMD, the command prompt will display in the search results.
  • Select Run as admin from the context menu.
  • On the confirmation page, click Yes.
  • Simply enter net stop spooler and press Enter.
  • The cli will display a message stating that the Print Spooler service was successfully ended.
  • Once more, type net stop spooler and press Enter.
  • Close Command Prompt after viewing the message – The Print Spooler service has successfully launched.
  • Restart your computer and try printing the test page again.

Step 7: Clear the Print Spooler of any pending print jobs.

  • Launch the C drive.
  • Follow this path: go to Windows > System 32 > Spool > Printers and remove all of the files included inside.
  • Alternatively, open the Run dialog box, enter C:WindowsSystem32SpoolPrinters, and press Enter.
  • Now, select the file in the Printers folder and press the Delete key on your computer.
  • Resume the Print Spooler service after removing the files.
  • Open the Run box, type Services.msc, and press the Enter key.
  • Locate the Print Spooler, right-click it, and choose Restart.
  • Reboot your computer to resolve the Brother printer error condition Windows 10 issue. Whether the problem persists, try to see if the Plug and Play detection is switched off.

Conclusion:

We have always attempted to provide the best feasible solution to major-minor issues such as canon printer error b200. That you’re unable to properly follow the manual techniques and fail to implement them. Talk to our skilled specialists and let them handle your portion of the task. Thousands of consumers from all around the world have complimented our online Canon pixma repair services. As a result, attempt to get canon printer repair error b200 from us and learn for yourself.

So, those were the seven methods that assisted me in resolving the Brother printer in error condition issue. My Brother printer is now operating at peak efficiency, with very small problems in between. However, if you are still experiencing the problem status, I would recommend contacting the printer professionals at Brother printer customer support. Those people are absolutely outstanding; they understand the mistake and can quickly remedy it.